Titanium stakes sell well per shelf centimetre: they are light, they never rust, and every tent owner eventually loses or bends a set. But one label covers a wide family - from 6 g hook pegs to 95 g ground anchors - and stocking the wrong mix is how brands end up with dead SKUs. Here is how the spec sheet translates into holding power.
Length: match the soil, not the tent
240 mm (8x240) is the hard-ground workhorse: firm pitches, hammock tarps and bivvy shelters where the pin only needs to bite the topsoil. Our LC-TD1 round-pin stake weighs 56 g with a strike top, cord slot and sharpened conical tip.
300-350 mm takes over in soft or mixed ground. The LC-TD4 is an 8x350 mm anchor at 86 g with a grooved tip that bites through mud and bog, so riverbank camps hold fast instead of pulling out at 3 a.m.
400 mm is the big-canopy end of the range - shade sails, event marquees and sand or snow where you need depth plus surface area. The LC-TD5 runs 8x400 mm at 95 g with three anti-slip grooves near the tip.
Shaft and weight: thin rods versus 8 mm pins
Slim 3-6 mm rods cut grams. The LC-TCD3 hook peg is about 6 g and the LC-TCD1 V-section stake about 13 g, both with oval cutouts that trim weight without losing strength. A six-piece set of V-stakes lands around 78 g.
8 mm pins add mass where it earns its keep: mallet-driven camps, storm-loaded guy lines and repeated season-after-season use. The same six-piece set in 8x240 mm hardware weighs roughly 340 g - a real difference for ultralight buyers, and a real difference in holding power on soft ground.
The practical rule for a product line: sell the slim V-stakes and hook pegs to backpackers on hard, compacted ground, and the 8 mm pins to family campers, glamping operators and event crews.
Head style decides how the stake gets driven
Flat strike tops take clean hammer hits (straight nail pegs, round pins). Big-head disc caps widen the strike surface and stop over-driving in soft terrain, which is why canopy and pasture pegs use them.
Big-hole tabs and eyes thread thick cord, gloved fingers or a pull tool - the format for sports fields, marquees and netting where ropes are heavy and hands are cold. Hook heads use a shepherd's-bend shape that grabs a guy line the moment tension appears.
Finish matters for merchandising as much as performance: anodized rainbow stakes are colourfast, never painted, and easy to spot in grass at dusk, while raw natural titanium suits buyers who want a technical, unbranded look.
What to stock, and how to test it
A practical starter mix is three SKUs: one anodized V-stake or hook peg for ultralight kits, one 8x240 mm big-head pin as the core camp option, and one 400 mm disc-cap or heavy pin for sand, snow and event work. Colour variants let the same tool cover several price points.
MOQ starts from 6 pieces per SKU with volume tiers, and samples ship in 5-10 days, so a retail test costs very little. The OEM program covers laser logos on the head, custom anodized colours, printed pouches and mixed multi-packs - enough to launch a private-label stake set without new tooling.
Want prices, samples or a custom titanium line?
MOQ from 5 pcs, ships within 72 hours, replies within 24 hours.